Speakers - HP Chromebook x360 14a Maintenance And Service Manual

3. Remove the Phillips M2.0 × 2.9 screw (2), and then remove the WLAN module (3).
NOTE:
antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable connects
to the WLAN module #1 Aux terminal.
4. If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on
the antenna connector, as shown in the following illustration.
To replace the WLAN module, reverse the removal procedures.

Speakers

To remove the speakers, use this procedure and illustration.
30 Chapter 5 Removal and replacement procedures for authorized service provider parts
Models have either one or two WLAN antennas. On models with two antennas, the #1 white WLAN
ENWW