Table 2-2
Left-side components and their descriptions (continued)
Component
(4)
(5)
Display
Use the illustration and table to identify the components on the display.
ENWW
microSD™ memory card reader
Power button
Description
Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1.
Hold the card label-side up, with the connectors facing
the computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the
▲
memory card reader.
When the computer is off, press the button briefly to turn
●
on the computer.
●
When the computer is on, press the button briefly to
initiate Sleep.
When the computer is in the Sleep state, press the button
●
briefly to exit Sleep (select products only).
When the computer is in Hibernation, press the button
●
briefly to exit Hibernation.
IMPORTANT:
Pressing and holding down the power button
results in the loss of unsaved information.
If the computer has stopped responding and shutdown
procedures are ineffective, press and hold the power button for
at least 10 seconds to turn off the computer.
Display
5