Behringer 1002 User Manual
Behringer xenyx 1002 mixers: user guide
Hide thumbs
Also See for 1002:
- User manual ,
- Quick start manual (18 pages) ,
- Technical specifications (3 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Behringer 1002
Summary of Contents for Behringer 1002
- Page 1 User Manual A50-57613-00003...
-
Page 2: Important Safety Instructions
XENYX 502/802/1002/1202 Important Safety Instructions This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to im- portant operating and maintenance instructions in the accompanying literature. -
Page 3: Table Of Contents
Well, for over 30 years, my passion has been music and electronics. This not only led me to establish BEHRINGER, but also enabled me to share my enthusiasm with our em- ployees. During all the years I’ve been involved... -
Page 4: Introduction
All other mixer functions can be included in this main function. The interface of BEHRINGER mixing consoles is optimized for these tasks enabling you to easily keep track of the signal path. The user’s manual The user’s manual is designed to give you both an overview of... -
Page 5: Control Elements And Connectors
The cut-off frequencies of the upper and lower band are 12 kHz and 80 Hz respectively. The mid band (802/1002/1202) is configured as a peak filter with a center frequency of 2.5 kHz. -
Page 6: Stereo Channels
The LEVEL control determines the volume of the channel being sent to the main mix. +4/-10 The stereo inputs of the XENYX 1002 and 1202 have an input sensitivity switch which selects between +4 dBu and -10 dBV. At -10 dBV (home-recording level), the input is more sensitive (requires less level to drive it) than at +4 dBu (studio level). -
Page 7: Cd/Tape Connectors
The CD/TAPE INPUTs are used to bring an external signal source (e.g. CD player, tape deck, etc.) into the console. They can also be used as a standard stereo line input, so the output of a second XENYX or BEHRINGER ULTRALINK PRO MX882 can be connected. Fig. 2.11:... -
Page 8: Installation
XENYX 502/802/1002/1202 tions (0 dB). Then use the TRIM controls to increase the input amplification until signal peaks show 0 dB on the level meter. When recording to digital recorders, the recorder’s peak meter should not go into overload. While analog recorders can be... -
Page 9: Specifications
1/3 as far left as possible; channels 2/4 as far right as possible; reference = +6 dBu. BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. -
Page 10: Warranty
Colors and specifications may vary slightly from product. Our Products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. - Page 11 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important information: Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the user’s authority to use the equipment. XENYX 502/802/1002/1202 BEHRINGER USA, Inc.