Heat Sink - HP Pavilion x360 Convertible PC Maintenance And Service Manual

4. Remove the system board (2) by sliding it up and to the left at an angle.
Reverse this procedure to install the system board.

Heat sink

Table 5-10 Heat sink description and spare part number information
Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Solid-state drive (see
c. System board (see
Remove the heat sink:
1. In the order indicated on the heat sink, remove the four Phillips M2.0×3.0 screws (1) that secure the heat
sink to the system board.
Bottom cover on page
Battery on page 25)
Battery on page
System board on page
23), and then remove the following components:
25)
35)
Component replacement procedures
Spare part number
L52065-001
37