Removal And Replacement Procedures; Component Replacement Procedures; Bottom Cover - HP Pavilion x360 Convertible PC Maintenance And Service Manual

5

Removal and replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION: Components described in this chapter should only be accessed by an authorized service provider.
Accessing these parts can damage the computer or void the warranty.
CAUTION: Only HP authorized service providers should perform the removal and replacement procedures
described here. Accessing the internal part could damage the computer or void the warranty.

Component replacement procedures

NOTE: Details about the computer, including model, serial number, product key, and length of warranty, are on
the service tag at the bottom of the computer. See
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for the computer, go to http://partsurfer.hp.com, select the country or region, and then follow
the on-screen instructions.
There are as many as 42 screws that must be removed, replaced, and/or loosened when servicing the computer.
Make special note of each screw size and location during removal and replacement.

Bottom cover

Table 5-1 Bottom cover description and spare part number information
Description
Bottom cover
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1. Remove the four rubber feet (1).
The rubber feet are available in the Rubber Foot Kit, spare part number L52067-001.
2. Remove the four Phillips M2.5×5.4 screws (2) under the rubber feet.
Labels on page 12 for details.
Component replacement procedures
Spare part number
L52060-001
23