Health O Meter 500HB Installation Instructions Manual page 9

27. Obtain the handlebars and place around the
scale pillar as shown.
28.
Align the bottom of the handlebar with the channels
on the base. Slide the handlebar onto the channel
until the bottom of the handlebar rests on the base.
Ensure the holes in the handlebar align with the holes
in the channel.
29.
Insert two of the ¼-20 x ½" Button Head Screws into
the back of the handlebar and into the channel. Use
the included Allen wrench to fully tighten and secure
the screws.
30.
Insert the remaining two ¼-20 x ½" Button Head
Screws into the back of the other side of the
handlebar and into the channel. Fully tighten to
secure.
Assembly is complete.
P/N 82-00009 REV A 500HB Installation Instructions REV20200402_web
9