Health O Meter 500HB Installation Instructions Manual page 6

13. Flip the drill guide (drill guide is used on both sides
of the scale platform) and position it on the other
side of the bottom of the platform.
14. With drill guide properly positioned on bottom of
scale platform, use a power drill and the provided
¼" drill bit to drill 4 holes through the other of the
side bottom of the scale platform.
15. Remove and discard drill guide. Carefully place the
scale upright on the floor. Platform will now have
8 holes for mounting the handlebars.
16. Use a utility knife or similar tool to remove plastic
burrs from the top of the scale platform.
17. Using the provided alcohol wipe, clean the entire
top surface of the scale platform.
P/N 82-00009 REV A 500HB Installation Instructions REV20200402_web
6