Related Manuals for THOMSON Grass Valley Kameleon HD Series
Summary of Contents for THOMSON Grass Valley Kameleon HD Series
- Page 1 KAM-HD-MULTI KAMELEON HD/SD MODULE SERIES Instruction Manual SOFTWARE VERSION 3.2.0 071843802 FEBRUARY 2009...
- Page 2 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040.001 The Quality System of: Grass Valley, Inc. 400 Providence Mine Road 15655 SW Greystone Ct. 10 Presidential Way Nevada City, CA 95945 Beaverton, OR 97006 Floor, Suite 300 United States United States Woburn, MA 01801...
- Page 3 KAM-HD-MULTI KAMELEON HD/SD MODULE SERIES Instruction Manual SOFTWARE VERSION 3.2.0 071843802 FEBRUARY 2009...
- Page 4 Benelux/Belgium: +32 (0) 2 334 90 30 Benelux/Netherlands: +31 (0) 35 62 38 42 1 N. Europe: +45 45 96 88 70 Germany, Austria, Eastern Europe: +49 6150 104 444 UK, Ireland, Israel: +44 118 923 0499 Copyright © Thomson, Inc. All rights reserved. This product may be covered by one or more U.S. and foreign patents.
-
Page 5: Table Of Contents
Contents Preface ..............About This Manual . - Page 6 Contents Video Proc Amps ..........Output Timing.
-
Page 7: Preface
Preface About This Manual This manual describes the features of a specific module of the 2000 Series Modular Products family including the Kameleon HD/SD product lines. As part of this module family, it is subject to Safety and Regulatory Com- pliance described in the Kameleon 2000 Series frame and power supply documentation (see the Kameleon 2000 Frames Instruction Manual). - Page 8 Preface KAM-HD-MULTI — Instruction Manual...
-
Page 9: Kameleon Hd/Sd
Kameleon HD/SD Multi-Function Module Introduction The Kameleon HD modules are part of the Grass Valley Kameleon Media Processing System family of products. They offer an ideal solution for high definition and serial digital video processing, frame synchronization, color correction, video processing, audio processing, and timing. This manual covers installation, configuration, and operation of the KAM-HD/SD-MULTI-Function module. -
Page 10: System Requirements
System Requirements • Color bars test signal generator, • Audio inputs and outputs on the rear modules are configurable as one of the following: • 8 inputs/0 outputs • 4 inputs/4 outputs • 0 inputs/8 outputs • Up to eight streams of input audio selectable for synchronization, then multiplexed into the output video stream and/or sent to available AES audio outputs on the rear module, •... -
Page 11: Installation
Installation Installation Installation of the Kameleon HD module is a process of: • Placing the dual-height KAM-HD-MULTI-UR or KAM-HD-MULTI-BR rear module in a rear frame slot (no other rear modules can be used), • Placing the media module in the corresponding front slot, and •... - Page 12 Installation Figure 2. 2000T1DNG Frame, Rear View J101 J102 Media section Media section Power connections rear slots 3-4 rear slots 1-2 Network (with VID-HDD-R Rear Module) and reference input connections 2. Insert the rear module into the vacant rear slot of the frame as illustrated in Figure 3.
- Page 13 Installation Figure 4. 2000T3NG Kameleon Frame, Front Slots Reference Distribution Slot (15) Network Slot (13) Main Power Supply Slot (18) (13) (15) Fan Sled (10) Slot (19) (11) (12) Secondary Power Supply Slot (20) Front Media Slots (1-12) Figure 5. 2000T1DNG Kameleon Frame Front Slot Reference Distribution Slot (6) Network Slot (5) Power Supply Slot (7)
-
Page 14: Cabling
Installation Cabling All cabling to the Kameleon HD module is done on the corresponding KAM-HD-MULTI-UR Rear (Figure 7 on page 15 for unbalanced audio inputs) or KAM-HD-MULTI-BR Rear (Figure 8 on page 15 for balanced audio inputs) at the back of the 2000 frame. There are a number of different input and output configurations possible depending on system configura- tion and module type. - Page 15 Installation Figure 7. KAM-HD-MULTI-UR Rear Module SD or HD SD or HD SDI Outputs (3) SDI Input KAM-HD MULTI-UR DATA FIBER IF AES I/O AES I/O Currently Currently not used not used Figure 8. KAM-HD-MULTI-BR Rear Module SD or HD SD or HD SDI Outputs (3) SDI Input KAM-HD...
-
Page 16: Power Up
Power Up Power Up The front LED indicators are illustrated in Figure 9. Upon power-up, the green PWR LED should light and the yellow CONF LED should illuminate for the duration of module initialization. Operation Indicator LEDs With factory default configuration and valid input and reference signals connected, only the green PWR LED should be on. -
Page 17: Remote Control Lockout
Power Up Remote Control Lockout When a jumper is placed across pins 1 and 2 of jumper block JP2 (see Figure 10), module output mode settings are locked out from remote con- trol. To have remote access, set the jumper across pins 2 and 3. Figure 10. -
Page 18: Quick Start Procedure
Quick Start Procedure Quick Start Procedure Follow the procedure below for a quick start method configuration for the Kameleon HD module: 1. Go to the E-MEM web page (page 85) to select a preset audio configuration if your audio needs match one of the four preset modes explained in Audio Preset Configurations on page 23, or set the audio... -
Page 19: Configuration And Adjustments
Configuration and Adjustments Configuration and Adjustments Kameleon HD configuration and monitoring can be performed using a web browser GUI interface or a networked Newton Control Panel. This section provides an overview of each of these controls along with the configuration parameters available with each type of control device. -
Page 20: Aes C/U/V Bits Pass Through
Configuration and Adjustments KAM-HD-MULTI audio capabilities are summarized in Table 2 below: Table 2. KAM-HD-MULTI Audio Capabilities Summary Asynchronous Audio CUVZ Passthrough SRC Bypass Auto Track Audio Source Audio Type Allowed Permitted Enabled Enabled Audio Synchronous only Yes or No AES Rear Connector Port Non-Audio Must be enabled... -
Page 21: Audio Paths
Configuration and Adjustments A control is provided on the AES Outputs web page for enabling or dis- abling the control bits in an AES signal called the AES C/U/V Bit Pass Through (AES Outputs Web Page on page 81). These bits may be generated locally at the AES output of the module (Pass Through disabled) or taken from the AES stream coming from an audio input or demultiplexed from video (Pass Through enabled). - Page 22 Configuration and Adjustments Processed Paired 1-4 Four of the eight audio streams selected in the Audio Input Select web page, either demuxed audio streams and/or the external AES audio inputs, can be selected as inputs to the audio processor. These four streams can be paired in any combination on the Audio Channel Pairing web page then processed as defined on the Audio Proc web page.
-
Page 23: Audio Preset Configurations
Configuration and Adjustments Audio Preset Configurations There are four different audio preset configurations. Selection of one of these configurations is done with the Audio Preset Config buttons on the E-MEM web page (E-MEM Web Page on page 85). Each of these configura- tions is intended to preset the audio inputs and outputs and set audio parameters for a specific audio application. - Page 24 Configuration and Adjustments Table 3 gives a summary of the parameter values set on the web pages when each of the four Audio Preset Configurations are selected. Table 3. Audio Preset Configuration Summary Universal 8 Parameters DeEmbed Embed TransCode Channel Page Num AES I/O Select...
-
Page 25: Configuration Summary
Configuration and Adjustments Configuration Summary The configuration parameters and monitoring functions available with the web browser interface and the Newton Control Panel are summarized in Table 4. The parameter defaults, choices, ranges, and resolution are pro- vided for each function. Table 4. - Page 26 Configuration and Adjustments Table 4. Summary of KAM-HD-MULTI Configuration Controls Range/Choices Web Page/ Newton Notes/ Function Default Resolution Function Name Panel Conditions Report input signal HD/SD Video In/ When input signal is – Present or Not Present SigStt status Input Signal State report Not Present, input video will be Report input video...
- Page 27 Configuration and Adjustments Table 4. Summary of KAM-HD-MULTI Configuration Controls Range/Choices Web Page/ Newton Notes/ Function Default Resolution Function Name Panel Conditions Color Correction and Video Processing Adjustments HD/SD Color Correction/ Lock R, G, and B gains Unlocked Locked or Unlocked RGBGnLok Video Gain Lock checkbox 0 to 200%...
- Page 28 Configuration and Adjustments Table 4. Summary of KAM-HD-MULTI Configuration Controls Range/Choices Web Page/ Newton Notes/ Function Default Resolution Function Name Panel Conditions G1SASdMux G1SBSdMux G2SASdMux G2SBSdMux G3SASdMux G3SBSdMux Delete All Input G4SASdMux Pass Input Embedded Audio HD/SD MUX/ Demuxed Groups Audio group insertion G4SBSdMux Processed Pair 1-4...
- Page 29 Configuration and Adjustments Table 4. Summary of KAM-HD-MULTI Configuration Controls Range/Choices Web Page/ Newton Notes/ Function Default Resolution Function Name Panel Conditions AuTkStt1 AuTkStt2 AuTkStt3 Auto tracking status Audio Sync/ AuTkStt4 – Enabled or Disabled for each audio stream. Auto Tracking Status AuTkStt5 AuTkStt6 AuTkStt7...
- Page 30 Configuration and Adjustments Table 4. Summary of KAM-HD-MULTI Configuration Controls Range/Choices Web Page/ Newton Notes/ Function Default Resolution Function Name Panel Conditions S1Ch1Gn S1Ch2Gn S2Ch1Gn Gain adjustments for Audio Gain/ -40 to + 6 dB S2Ch2Gn each audio stream 0 dB Streams (1-2) or (3-4) (0.1 dB steps) S3Ch1Gn...
-
Page 31: Newton Control Panel Configuration
Configuration and Adjustments Newton Control Panel Configuration A Newton Control Panel (hard or soft version) can be interfaced to the Kameleon 2000 Series frame over the local network. Control panel access offers the following considerations for module configuration and moni- toring: •... -
Page 32: Web Browser Interface
Configuration and Adjustments Web Browser Interface The web browser interface provides a graphical representation of module configuration and monitoring. Use of the web interface offers the following considerations: • Provides complete access to all module status and configuration func- tions, including naming of inputs and outputs, factory parameter and name default recalls, E-MEM functions, slot configuration, and SNMP monitoring controls. - Page 33 Configuration and Adjustments Figure 13. 2000NET GUI The Links section lists the frame and its current modules. The selected link's Status page is first displayed and the sub-list of links for the selection is opened. The sub-list allows you to select a particular information page for the selected device. Content display section displays the information page for the selected frame or module (frame slot icons are also active links).
-
Page 34: Web Page Operations And Functional Elements
Configuration and Adjustments Web Page Operations and Functional Elements The following conventions and functional elements (shown at left) are used in Kameleon web page operations. (The examples shown throughout this manual represent 2000NET software version 4.0.0 or later): • Pulldown menus allow you to choose selections from a list. Pulldown Menus •... -
Page 35: Status And Identification Header
Configuration and Adjustments Status and Identification Header Each configuration web page has a Status and Identification Header reporting various status and configuration items on the module (Figure 14). Figure 14. Status/ID Header Status LED Icon The Status LED icon reports communication status for the frame slot and is a link to the module Status web page where Warnings and Faults are dis- played. -
Page 36: Kameleon Hd Links And Web Pages
Kameleon HD Links and Web Pages Kameleon HD Links and Web Pages The 2000 GUI provides the following links and web pages for the KAM-HD-MULTI modules: • Status – reports input, reference, and frame bus status and module information (page 38), •... - Page 37 Kameleon HD Links and Web Pages The KAM-HD-MULTI module links are shown in Figure 15 for available web pages when an HD input type is selected (left) or an SD input (right). Figure 15. KAM-HD-MULTI Web Page Links KAM-HD-MULTI—Instruction Manual...
-
Page 38: Status Web Page
Kameleon HD Links and Web Pages Status Web Page The Status web page provides an overall indication of the health of the system, audio configuration information, rear module type installed, and this link provides links to web pages for the active components: •... -
Page 39: Warning/Fault Summary
Kameleon HD Links and Web Pages Warning/Fault Summary Warnings and faults are reported in the Warning/Fault summary section of the Status web page. When a fault or warning is detected, it will be reported in this area. A Fault indicates a serious condition that prohibits proper operation. A Warning indicates a condition which may or may not adversely affect operating conditions, but should be noted. - Page 40 Kameleon HD Links and Web Pages Figure 16. Kameleon HD Status Web Page – 8In/0 Out Warning and Fault summary section KAM-HD-MULTI—Instruction Manual...
- Page 41 Kameleon HD Links and Web Pages Figure 17. Kameleon HD Status Web Page – 4 In/4 Out Figure 18. Kameleon HD Status Web Page – 0 In/8 Out KAM-HD-MULTI—Instruction Manual...
- Page 42 Kameleon HD Links and Web Pages Figure 19. Kameleon HD Status Web Page – Balanced Rear (8 In/0 Out KAM-HD-MULTI—Instruction Manual...
-
Page 43: I/O Config Web Page
Kameleon HD Links and Web Pages I/O Config Web Page Use the I/O Config web page to: • View a graphical overview of the rear module connectors, this link • See signal status of inputs, • Set audio input and output configuration, and •... -
Page 44: Signal Naming
Kameleon HD Links and Web Pages Signal Naming Enter a signal name (up to 12 characters) for each operational input/output. The name will be used to identify the signal in other config- uration web pages. Factory default names for all models are shown on the individual I/O web pages for each model. - Page 45 Kameleon HD Links and Web Pages Figure 21. KAM-HD-MULTI-UR I/O Config Web Page – 4 In/4 Out Figure 22. KAM-HD-MULTI-BR I/O Config Web Page – 4 In/4 Out KAM-HD-MULTI—Instruction Manual...
- Page 46 Kameleon HD Links and Web Pages Figure 23. KAM-HD-MULTI-UR I/O Config Web Page – 0 In/8 Out KAM-HD-MULTI—Instruction Manual...
-
Page 47: System Config Web Page
Kameleon HD Links and Web Pages System Config Web Page The System Config web page (Figure 25 on page 48) provides the following system configuration controls: • Selection of the SD or HD input video type and rate for the module. this link •... -
Page 48: Video Proc Amps
Kameleon HD Links and Web Pages Video Proc Amps Enable or disable all HD and SD video processing, including color correc- tion on the module with the radio button. Proc amp Enabled Disabled status will be reported on each of the Video Proc and Color Correction web pages. -
Page 49: Output Timing
Kameleon HD Links and Web Pages Output Timing For all modules, an output timing source can be selected from the fol- lowing: • – when is selected, modules with frame Frame Reference Frame Reference sync capability (KAM-HD-FS and KAM-HDD-FS) can be genlocked to the frame reference inserted into the 2000 frame. -
Page 50: Functional View Web Pages
Kameleon HD Links and Web Pages Functional View Web Pages The Functional View web pages illustrate a block diagram of the Kameleon HD front media module showing module functions and signal paths that are active or inactive in the current configuration. They can be used as a link map for configuring module functions. - Page 51 Kameleon HD Links and Web Pages Figure 27 shows a Functional View for a KAM-HD-MULTI module with an SD input type selected. this link Figure 27. KAM-HD-MULTI Functional View Web Page – SD Input Type KAM-HD-MULTI—Instruction Manual...
-
Page 52: Module Configuration Web Pages
Kameleon HD Links and Web Pages Module Configuration Web Pages Module configuration and monitoring is provided for the following HD or SD video and audio functions (depending on video input type and audio configuration setting) with the web browser GUI or control panel interface: •... -
Page 53: Hd/Sd Video In Web Page
Kameleon HD Links and Web Pages HD/SD Video In Web Page The HD or SD Video In web page (Figure 28 shows HD input type) pro- vides status on the HD or SD Video input for the following: • – this field reports the presence or absence of the input Input Signal State video signal. -
Page 54: Hd/Sd Frame Sync Web Page
Kameleon HD Links and Web Pages HD/SD Frame Sync Web Page The HD or SD Frame Sync web page provides adjustments for horizontal and vertical output timing, a minimum delay mode, loss of signal controls, and a delay wrap position graphic. The controls available on the Frame Sync web page (Figure 29 on page 56 Figure 30 on page 57... - Page 55 Kameleon HD Links and Web Pages Delay Wrap Position This indicator will display with a blue bar, the fraction of the final frame of actual video delay through the frame sync. For example, with 1080i video and Minimum Delay Mode not selected, if 600 lines is entered by the user, that actual delay through the module will be anywhere from about 1 to 2 frames depending on the following condi- tions:...
- Page 56 Kameleon HD Links and Web Pages Figure 29. Frame Sync Web Page – Frame Sync Timing Mode KAM-HD-MULTI—Instruction Manual...
- Page 57 Kameleon HD Links and Web Pages Figure 30. Frame Sync Web Page – Frame Sync Timing Mode KAM-HD-MULTI—Instruction Manual...
-
Page 58: Hd/Sd Color Correction Web Page
Kameleon HD Links and Web Pages HD/SD Color Correction Web Page The HD or SD Color Correction web page (Figure 31 on page 59 for an HD input type) provides the following controls: • Specific R, G, and B gain and offset video processing controls for the input signal, •... - Page 59 Kameleon HD Links and Web Pages Figure 31. Color Correction Web Page Enable or disable video processing on System Config web page. KAM-HD-MULTI—Instruction Manual...
-
Page 60: Hd/Sd Video Proc Web Page
Kameleon HD Links and Web Pages HD/SD Video Proc Web Page The HD or SD Video Proc web page (Figure 32 on page 61) is active when radio button is selected on the System Config web page (see Enabled page 47). - Page 61 Kameleon HD Links and Web Pages Figure 32. HD Video Proc Web Pager Enable or disable video processing on System Config web page. KAM-HD-MULTI—Instruction Manual...
-
Page 62: Hd/Sd Mux Web Page
Kameleon HD Links and Web Pages HD/SD MUX Web Page Use the HD or SD MUX (multiplex) web page (Figure 34 on page 64) to: • Delete all input demuxed audio groups from the SDI video output signal to allow insertion of audio (no replacement) on the video output, this •... - Page 63 Kameleon HD Links and Web Pages Group Insertion Up to four audio groups (Groups 1-4, Stream A and B) can be inserted into the SDI output stream. Audio groups present in the video output stream cannot be replaced. Existing audio groups must be deleted by checking the checkbox or a new group can be inserted into Delete All Input Demuxed Groups any empty group location.
- Page 64 Kameleon HD Links and Web Pages Figure 34. MUX Web Page – Group Insertion for Groups (1-2) KAM-HD-MULTI—Instruction Manual...
-
Page 65: Sd Video Out Web Page
Kameleon HD Links and Web Pages AES Output Resolution Select the AES output resolution for each output with the 20 bit 24 bit radio button. AES C/U/V Bit Pass Through Enable or disable the AES C/U/V Bits Pass Through by selecting the Enable checkbox. -
Page 66: Audio Input Status Web Page
Kameleon HD Links and Web Pages Audio Input Status Web Page Use the Audio Input Status web page to see the status of each available audio input. The Audio Input Select web pages for each of the possible audio input and output configurations are shown in the following figures: •... - Page 67 Kameleon HD Links and Web Pages Figure 36. Audio Input Status – 8 in/0 Out KAM-HD-MULTI—Instruction Manual...
- Page 68 Kameleon HD Links and Web Pages Figure 37. Audio Input Status – 4 In/4 Out Figure 38. Audio Input Status – 0 In/8 Out KAM-HD-MULTI—Instruction Manual...
-
Page 69: Audio Input Select Web Page
Kameleon HD Links and Web Pages Audio Input Select Web Page Use the Audio Input Select web page to define the eight audio streams from the available audio inputs that will be sent to the Audio Sync web page for delay adjustments. - Page 70 Kameleon HD Links and Web Pages Figure 39. Audio Input Select Web Page – 8 In/0 Out KAM-HD-MULTI—Instruction Manual...
- Page 71 Kameleon HD Links and Web Pages Figure 40. Audio Input Select Web Page – 4 In/4 Out Figure 41. Audio Input Select Web Page – 8 In/0 out KAM-HD-MULTI—Instruction Manual...
-
Page 72: Audio Sync Web Page
Kameleon HD Links and Web Pages Audio Sync Web Page The Audio Sync web page (Figure 42 on page 73) provides controls for setting the following: • Enabling auto tracking, this • Audio disruption processing, and link • Setting delay adjustments for the two channels in each of the eight audio input streams either in locked mode or separately. - Page 73 Kameleon HD Links and Web Pages Figure 42. Audio Sync Web Page KAM-HD-MULTI—Instruction Manual...
-
Page 74: Audio Processing Select Web Page
Kameleon HD Links and Web Pages Audio Processing Select Web Page The Audio Processing Select web page (Figure 43) allows selection of four of the eight audio streams selected on the Audio Input Select web page to be processed in the audio gain, audio channel pairing, and audio pro- cessing sections of the module. -
Page 75: Audio Gain Web Page
Kameleon HD Links and Web Pages Audio Gain Web Page The Audio Gain web page is shown in Figure 44 on page 76 with View Select set for as an example. These web pages provide gain Streams (1-2) adjustments for the four streams of audio that have been selected to be pro- cessed on the Audio Processing Select web page. - Page 76 Kameleon HD Links and Web Pages Figure 44. Audio Gain Web Page – Streams (1-2) KAM-HD-MULTI—Instruction Manual...
-
Page 77: Audio Channel Pairing Web Page
Kameleon HD Links and Web Pages Audio Channel Pairing Web Page The Audio Channel Pairing web pages allows the audio streams that have been selected for processing to be configured for passing the audio through with no re-pairing as shown in Figure 45 on page 77 Pairs (1-2) Figure 46 on page 78... - Page 78 Kameleon HD Links and Web Pages Figure 46. Audio Channel Pairing Web Page – Pairs (3-4) KAM-HD-MULTI—Instruction Manual...
-
Page 79: Audio Proc Web Page
Kameleon HD Links and Web Pages Audio Proc Web Page Use the Audio Proc web page as shown in the example in Figure 47 on page 79 to select a processing output mode for each of the two channels in the audio pairs created on the Audio Channel Pairing web page. - Page 80 Kameleon HD Links and Web Pages Output Processing Set the output processing for each channel (A and B) for each Audio Pair (Pair 1-4) with the Processing pulldown to one of the following output con- ditions: • In1 - selects the audio present on In1 as the channel output. •...
-
Page 81: Aes Outputs Web Page
Kameleon HD Links and Web Pages AES Outputs Web Page Use the AES Outputs web page to: • Select audio streams to send to the available AES/EBU connectors des- ignated as outputs on the rear module. The number of connectors avail- able depends on the audio input/output configuration set on the I/O (I/O Config Web Page on page Config web page... - Page 82 Kameleon HD Links and Web Pages Figure 48. AES Outputs Web Page – First Set – 8 In/0 Out Figure 49. AES Outputs Web Page – Second Set – 8 In/0 Out KAM-HD-MULTI—Instruction Manual...
- Page 83 Kameleon HD Links and Web Pages Figure 50. AES Outputs Web Page – First Set – 4 In/4 Out and 0 In/8 Out KAM-HD-MULTI—Instruction Manual...
- Page 84 Kameleon HD Links and Web Pages Figure 51. AES Outputs Web Page – Second Set – 4 In/4 Out KAM-HD-MULTI—Instruction Manual...
-
Page 85: E-Mem Web Page
Kameleon HD Links and Web Pages E-MEM Web Page The E-MEM web page provides local operations for learning and recalling configurations into E-MEM registers and audio preset configurations. File operations are also available for saving or loading the learned E-MEM files to and from a hard disk or other accessible media. - Page 86 Kameleon HD Links and Web Pages Figure 53. E-MEM Web Page (Standard View) KAM-HD-MULTI—Instruction Manual...
- Page 87 Kameleon HD Links and Web Pages The Advanced View (Figure 54 on page 88) includes a Local Operations section to Learn and Recall configurations and a File Operations section to provide a . or function for saving or loading E-MEM files Save to..
- Page 88 Kameleon HD Links and Web Pages Figure 54. E-MEM Web Page (Advanced View) KAM-HD-MULTI—Instruction Manual...
- Page 89 Kameleon HD Links and Web Pages To Save an E-MEM configuration to a file on a hard drive or other accessible media: 1. Select the corresponding button in the File Operations section. Save to... 2. This will bring up a File Download screen (not shown), select Save bring up the Save As screen shown in Figure...
- Page 90 Kameleon HD Links and Web Pages To load a saved E-MEM from a location: 1. Select the button in the File Operations section. Load from ... 2. This will bring up the Load E-MEM page (Figure 56). Figure 56. Load E-MEM Page 3.
- Page 91 Kameleon HD Links and Web Pages 5. This should place the recalled E-MEM file into the corresponding E-MEM window. 6. Select the corresponding button to invoke this configuration. Recall Audio Preset Configs Four Audio Preset Configs buttons (Figure 58) are provided on the bottom of the E-MEM web page for setting up audio I/O configuration for the rear module and various audio parameters on the module.
-
Page 92: Slot Config Web Page
Kameleon HD Links and Web Pages Slot Config Web Page Use the Slot Config web page shown in Figure 59 to perform the following functions on the module: • Locate Module • Slot Identification • Slot Memory this link • Link to Frame Health Reports 2000NET web page (2000T3 Frames) •... -
Page 93: Locate Module
Kameleon HD Links and Web Pages Locate Module Selecting from the pulldown flashes the yellow COMM Flash Locate Module and CONF LEDs on the front of the module so it can be located in the frame. Slot Identification You may identify the module by typing a specific name in the field. -
Page 94: Led Reports Link
Kameleon HD Links and Web Pages LED Reports Link Select the LED Reports link to open the 2000NET LED Reporting web page. Normally, every module in the frame will report to the 2000NET module any Fault, Signal Loss, Reference Loss, or Config Error conditions. These conditions will be reflected by the status LEDs on the 2000NET module. -
Page 95: Specifications
Specifications Specifications Table 5. KAM-HD-MULTI-Function Module Specifications Parameter Value Serial Digital Input Number of inputs 1 HD or SD Signal type 1080i @ 59.94, 50 1080sF @ 24 1080p @ 24 720p @ 59.94, 50 480i @ 59.94 (PAL-B) 576i @ 50 (NTSC) Connector type 75 ohm BNC Return loss... - Page 96 Specifications Table 5. KAM-HD-MULTI-Function Module Specifications Parameter Value Electrical Length Input to output delay: Default with zero user input delay In delay mode or in genlock mode with zero input video delay with respect to genlock frame position) Full-frame mode 1 frame periods in all formats Minimum delay mode ~ 300 pixel periods in all formats...
-
Page 97: Updating Software
Complete software update instructions are given in the latest release notes for this product. Release notes are posted with the software files on the ftp site and on the Thomson Grass Valley web site at this URL: www.thomsongrassvalley.com/docs/modular KAM-HD-MULTI—Instruction Manual... -
Page 98: Service
Service Service The Kameleon HD modules make extensive use of surface-mount tech- nology and programmed parts to achieve compact size and adherence to demanding technical specifications. Circuit modules should not be ser- viced in the field unless directed otherwise by Customer Service. If your module is not operating correctly, proceed as follows: •... - Page 99 Index Numerics paths overview presence indicator 2000GEN module Preset Configuration 2000NET module Preset Configurations requirements buttons on E-MEM web page overview processing summary table web page controls AES C/U/V Bit Pass Through AES Outputs web page Audio Channel Pairing web page MUX web page Audio disruption processing overview...
- Page 100 Index color saturation Fine adjust button remote control overview summary table frame COMM LED 1 RU 3 RU CONF (configuring) LED Frame Health Reporting configuration factory default frame sync overview remote controls Remote, GUI summary table control panel Frame Sync web page Newton Control Panel Frame Sync web page (HD or SD) summary table...
- Page 101 Index installation software updating module set Newton Control Panel control summary table overview NUM AES I/O Select radio buttons jumper (onboard) Local and Remote online documentation operational conditions KAM-HD-MULTI module LED indications features output timing source installation selecting system requirements summary table web page links outputs...
- Page 102 Index summary table voltage tespoints Sample Rate Conversion (SRC) remote control summary table SD video warning messages input format selection 25, 47, web browser overview SD Video In web page web site documentation SD Video Out web page web site FAQ database signal naming web site Grass Valley I/O Config web page...