Solid-State Drive Specifications - HP OMEN 16 Maintenance And Service Manual

Table 9-2 Display specifications
Active diagonal size
Resolution
Surface treatment
Brightness
Viewing angle
Backlight
Display panel interface

Solid-state drive specifications

This section provides specifications for your solid-state drives.
Table 9-3 Solid-state drive specifications
Dimensions
Height
Length
Width
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Random write
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is
less. Actual drive specifications might differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Metric
40.9 cm
2560 × 1440 (QHD)
1920 × 1080 (FHD)
Antiglare
250 nits
300 nits
UWVA
WLED
eDP
512 GB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
PCIe
< 1.0 ms
0.1 ms
up to 2150 MB/s
Up to 300,000 IOPs
up to 1550 MB/s
Up to 100,000 IOPs
1,000,215,216
0°C to 70°C (32°F to 158°F)
Solid-state drive specifications
U.S.
16.1 in
1 TB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
PCIe
1.0 ms
0.1 ms
up to 2150 MB/s
Up to 300,000 IOPs
up to 1550 MB/s
Up to 100,000 IOPs
1,500,336,388
75