Rj-45 Door - HP OMEN 16 Maintenance And Service Manual

2. Remove the touchpad cable from the hole in the protective tape (1).
3. Lift the protective tape off the top of the touchpad (2).
4. Remove the conductive tape from the right screw (3).
5. Remove the three broad head Phillips M2.0 × 2.0 screws (4) from the touchpad.
6. Remove the touchpad from the computer (5).
Reverse this procedure to install the touchpad.

RJ-45 door

To remove the RJ-45 door, use this procedure and illustration.
Component replacement procedures 51