Solid-State Drive - HP OMEN 16 Maintenance And Service Manual

3. Remove the battery from the computer (3).
To replace the battery, reverse the removal procedures.

Solid-state drive

To remove the solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description
1 TB, PCIe, TLC
512 GB, PCIe, TLC
Thermal pad
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
Preparation for disassembly on page
Bottom cover on page 30).
30).
Battery on page 31).
Component replacement procedures
Spare part number
L85348-001
L85360-001
M57181-001
33