Touchpad - HP Chromebook 11a Maintenance And Service Manual

2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect the TouchPad
cable from the TouchPad..
3. Remove the TouchPad cable.
Reverse this procedure to install the touchpad cable

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-2 Touchpad description and part numbers
Description
Touchpad
NOTE: The touchpad spare part kit does not include the touchpad bracket or touchpad cable. The touchpad
bracket is included in the Bracket Kit, spare part number L18300-001 The touchpad cable is included in the
Cable Kit, spare part number L14906-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the top cover/keyboard (see
Remove the touchpad:
1. Release the shielding material (1) that covers the top edge of the TouchPad.
2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to the
keyboard/top cover with double-sided adhesive.)
ENWW
Preparation for disassembly on page
Top cover/keyboard on page
Spare part number
L14922-001
29).
29).
Component replacement procedures 31