8.
Release the ZIF connector (4) to which the TouchPad cable is connected, and then disconnect the TouchPad
cable from the system board.
Reverse this procedure to install the top cover/keyboard.
Touchpad cable
To remove the touchpad cable, use this procedure and illustration.
NOTE:
The touchpad cable is included in the Cable Kit, spare part number L14906-001.
Before removing the touchpad cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the top cover/keyboard (see
Remove the touchpad cable:
1.
Detach the TouchPad cable (1) from the keyboard/top cover. (The TouchPad cable is attached to the
keyboard/top cover with double-sided adhesive.)
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Top cover/keyboard on page
29).
29).
ENWW