Use fixtures made of static-safe materials when fixtures must directly contact dissipative surfaces.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
●
polystyrene foam.
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
Avoid contact with pins, leads, or circuitry.
●
Recommended materials and equipment
HP recommends certain materials and equipment to prevent static electricity.
Antistatic tape
●
Antistatic smocks, aprons, or sleeve protectors
●
●
Conductive bins and other assembly or soldering aids
Conductive foam
●
●
Conductive tabletop workstations with ground cord of 1 MΩ ±10% resistance
Static-dissipative table or floor mats with hard tie to ground
●
Field service kits
●
Static awareness labels
●
Wrist straps and footwear straps providing 1 MΩ ±10% resistance
●
●
Material handling packages
Conductive plastic bags
●
●
Conductive plastic tubes
Conductive tote boxes
●
Opaque shielding bags
●
Transparent metallized shielding bags
●
Transparent shielding tubes
●
ENWW
Electrostatic discharge information
21