Table of Contents
Advertisement
1.3
START-UP
1.3.1 Programming current time and day
08:50
VE
Sitting room
T:
00.0 °C
U:
00.0 %
Fig. 1-2
Press the
button to enter the navigation menu.
Press buttons
until selecting menu "02. TIME
SLOTS
N a v i g a t i o n
02.
SET-POINT
03.
Time slots
04.
Info
Fig. 1-3
Press button
to enter current "Time and Day" mode.
C l o c k
Setting the clock:
09:50
Friday 10/06/11
Fig. 1-4
Press the
button again to make the value indicating
the hours to flash.
Set as desired by pressing arrows
press button
to confirm and for the minute figure
to start blinking.
Proceed in the same way adjusting the minutes, day of
the week, day, month and year.
At the end press button
main screen.
10/06/11
M01
m e n u
K 0 1
. At the end,
twice to go back to the
1.4
SELECTION OF FUNCTIONING MODE
The "System Manager Kit" according to the functioning
mode selected, the CAR V2 remote control performs the
requests of the user, displaying the results on the display.
By pressing button
tially from stand-by to summer operation, summer with
cooling, winter and party.
The antifreeze function is also provided in the mode:
stand-by, summer and winter.
1.4.1 Functioning in stand-by mode
With the "System Manager Kit" in stand-by mode, the
symbol
is displayed (see Fig. 1-5). The system can
only work in case of room antifreeze request. In this
status the current day and time are still displayed, along
with any operating faults, present humidity percentage
and ambient temperature in the main area.
Note: press arrows
for any other stored areas.
08:50
VE
Sitting room
T:
00.0 °C
U:
00.0 %
Fig. 1-5
1.4.2 Operation in summer mode
Pressing button
(
) the "System Manager Kit" enables the system to
domestic hot water production only, disabling room
central heating (see Fig. 1-6). The display shows current
day and time, any operating faults, ambient temperature
and humidity percentage in the main area.
N.B.: press arrows
for any other stored areas.
08:50
VE
Sitting room
T:
00.0 °C
U:
00.0 %
Fig. 1-6
9
the status changes sequen-
to view the same parameters
10/06/11
M01
switches to summer operation
to view the same parameters
10/06/11
M01
Advertisement
Table of Contents
