Table of Contents
Advertisement
The lower part of the display shows the parameter that
can be changed (it varies according to configuration).
Once the system has captured the data (indicated with
the text "Attesa dati... " (Waiting for data...), it is possible to
change the value by turning the main switch and pressing
to confirm the parameter change.
The values that can be found according to the configu-
ration, are:
- Set room: defines the room zone temperature.
- Set flow: defines the system's flow temperature to the
zone.
- Flow offset: changes the operation curve of the external
probe.
State
• Comfort / Economy / Manual operation.
Once the calendar is set and the relative association of
days is executed, the system operates automatically by
switching from "comfort" to "economy" according to
what has been set.
• Comfort (
). During periods in comfort mode, a
relative icon appears next to the operation mode.
• Economy (
). During periods in economy mode, a
relative icon appears next to the operation mode.
• Manual (
). If the remote panel was set to manage the
room temperature of the zone, if required, it is possible
to change the value manually for a determined range.
Turning the main switch changes the room tempera-
ture, and pressing it confirms the change. The change
is displayed by the symbol "
activate until the next time slot change within the active
calendar or until the default value of the parameter is
restored.
Description
Stand-by
Summer
Summer with cooling
Winter
". This change remains
• Operation with external probe.
When the system is associated with the external probe,
the relative symbol (
ment, the system's flow temperature for room central
heating is managed by the external probe depending
on the external temperature measured. It is possible to
change the operation curve by using the main switch and
changing the external probe offset (Fig. 7-12).
• Clock and programs.
From this menu, it is possible to set the system's date and
time as well as the time slots for operation in comfort
and economy mode.
• Date and time. On first electric supply voltage from
the remote panel, or in the event of a voltage drop, you
must set the date and time. Proceed as follows:
- Press the "Menu" button (Ref. 3 Fig. 7-12), select by
pressing the main selector (Ref. 1 Fig. 7-12) the item
"Clock and Programs", then "Date and time".
49
Fig. 7-13
) is displayed. From this mo-
Advertisement
Table of Contents
