Immergas System Manager Kit Instructions And Warnings page 48

4
2
Key:
1 - Main parameters switch with button to
confirm and save data
2 - Left context button
3 - Right context button
4 - Display
Once the device has been powered, it goes into the
status prior to switch-off. Press the "Modo" (Mode)
button to cyclically select the desired mode amongst
those available.
The operation mode is general and applies to all zones,
the current mode in use is displayed by the relative icon
at the bottom left corner (Fig. 7-12).
Also, depending on the system's configuration, the main
screen displays various information regarding the system,
amongst which:
State Description
Room humidity value
nn
External temperature value (external
nn
probe enabled)
Production of Domestic Hot Water in
progress
Request for room central heating or
cooling in progress
12:34 Fr 3 Jan 2014
20.6
67%
13°C
Room set 21.0°C
Mode
48
°C
Menu
Dehumidify and cool room in progress
Dehumidify room in progress
Comfort temperature operation
Economy temperature operation
Operation in manual mode
External probe enabled
Anomaly present
3
1
Fig. 7-12