Immergas System Manager Kit Instructions And Warnings page 46

Select the function and adjust the time slots.
- Select the interval of days that one wishes to program,
the days being programmed flash.
- Select the time slots, which are shown according to the
sequence below:
Time slot 1,
Time slot 4,
- Then select the temperature for that time slot.
Fig. 7-5
Fig. 7-6
Time slot 2, Time slot 3,
Time slot 5, Time slot 6.
N.B.: when selecting the temperature relating to the time
slot, one can also set the boiler in OFF mode "
allows to switch the boiler off in the pre-set time interval.
Repeat the operations for all the time slots and for the
days required.
To exit the time slot programming mode wait for a few
seconds or turn the selector until "
press the main selector.
Time slot activation. By pressing the button "
can activate system operation according to the settings
made previously. The activation of the time slot mode is
signalled by the activation of the relative symbol "
disable the function and enable manual operation press
the button " " again. In case of time slots disabling from
OFF mode, a new room set must be restored.
46
Fig. 7-7
" that
oFF
" appears and
EsC
" one
". To
Fig. 7-8