Functions Protected By Code - Immergas System Manager Kit Instructions And Warnings

Hide thumbs Also See for System Manager Kit:
Table of Contents

Advertisement

• Operating hours. It is possible to read the operating
hours of the heat pump, the auxiliary central heating
and the solar pump.
Press the arrows
mento". (Hours of operation).
Press the
button to enter the submenu.
H o u r s
o f
o p e r a t i o n
Heat pump: 0000000 h
Fig. 5-5
By pressing the arrows
operating hours of the devices used in the system.
At the end, press the
SISTENZA" (ASSISTANCE) menu.
5.1

FUNCTIONS PROTECTED BY CODE.

The sub-menus listed below, included in menu "06.
SUPPORT" (Fig. 5-1) are advanced settings (reserved to
a qualified technician) and a password must be entered
to access them.
- 04. System definition.
- 05. Thermoregulation.
- 06. Domestic hot water.
- 07. Solar system.
- 08. Integration.
- 09. Supervision.
- 10. Reset hour meter.
- 11. Manual management.
- 12. Initialisation.
- 13. Cascade parameters.
and select "03. Ore Funziona-
O 0 1
it is possible to view the
button to go back to the "AS-
• System definition. Within this menu it is possible to
set the features of the system that need to be managed.
Press the arrows
tion".
Press the
button to enter the submenu.
S y s t e m
d e f i n i t i o n
Plant type
Zones: 1 Fix
DHW:
H. temperature:
Fig. 5-6
- Areas (1 fixed, 1 mixed, 2 mixed, 2 mixed and 1 fixed,
3 mixed). The area no. depends on the no. of expansion
kits present:
1 fixed = no expansion kit
1 mixed = 1 expansion kit (address 1)
2 mixed = 2 expansion kits (address 1 and 2)
3 mixed or 2 mixed and 1 fixed= 3 expansion kits (ad-
dress 1, 2 and 3).
N.B.: If the zone in high temperature is enabled, it
will only be possible to select the gas boiler in the "08.
Integration" menu.
- Remote. Lets you select the type of remote device (zone
control/remote zone control).
Press the
button again until the parameter that
requires changing starts to flash.
Press the arrows
Press the
button again until the page title starts
to flash.
By pressing the arrows
other pages reported here below cyclically:
22
and select "04. System Defini-
P 0 1
No
NO
to change the desired parameter.
it is possible to view the

Advertisement

Table of Contents
loading

Table of Contents