Assistance Menu - Immergas System Manager Kit Instructions And Warnings

5
ASSISTANCE
MENU
Press the button to enter the navigation menu.
Press buttons
PORT" (Fig. 5-1).
N a v i g a t i o n
05. ALARM HISTORY
06. SERVICE
01. SET-POINT
Fig. 5-1
Press the button to enter the menu.
From this screen it is possible to access the submenu
to manage and configure the work parameters for
the peripherals installed in the system. Some of these
submenus are protected by a code (which can be used
exclusively by the Immergas technician) while others are
also visible to the user.
The submenus that are available to the user are:
• Language. It is possible to choose the language that
will be used in the application (Italian or English)
Press the arrows
Press the button to enter the submenu.
L a n g u a g e
Current language:
ITALIAN
Fig. 5-2
Press the
button again to make the language that
requires changing to flash.
Press the arrows
At the end, press the
SISTENZA" (ASSISTANCE) menu.
until selecting menu "05. SUP-
m e n u
and select "01. Language".
L 0 1
to select the desired language.
button to go back to the "AS-
• Information. It is possible to view the software and
firmware version on the device. There is also informa-
tion relative to system operation and to the heat pump
connected.
Press the arrows
Press the button to enter the submenu.
Information
Software revision:
SZIMMGI01 - rev. XX.XX
of 31-05-12
Fig. 5-3
Press arrows
" 02. Information".
- Heat pump. The option lets you view detailed infor-
mation on heat pumps (example: Audax Top 6 ErP
connected to the system manager).
Information
Heat pump 1
Audax Top 6
Request: Heating
SPT: 35 °C
LWT: 30°C
TD: 47 °C
Fig. 5-4
At the end press button
main screen.
At the end, press the
SISTENZA" (ASSISTANCE) menu.
21
and select "02. Information".
to display the next screens of menu
Online
MODE: HEAT
Freq: 45 Hz
TS: 02°C
twice to go back to the
button to go back to the "AS-
N01
N07