Programming Operating Time In Comfort Mode; Daily Hourly Program - Immergas System Manager Kit Instructions And Warnings

Hide thumbs Also See for System Manager Kit:
Table of Contents

Advertisement

Press arrows
(NO) any option. Press the
the modification.
At the end press button
main screen.
U s e r
s e t .
Calendar enable HP
Mon : CAL1
| Tue
Wed : CAL1
| Thur : CAL1
Fri : CAL1
| Sat
Sun : CAL1
|
Fig. 2-12
In case of heat pump temporary enable you can set the
ignitions calendar.
U s e r
s e t .
Integration manual
disable comand:
Fig. 2-13
- Integration manual disabling. Enables the operation
of the secondary generator to be permanently disabled.
- Separate management of central heating/cooling.
The option enables a diverter valve to be activated for
separation of hot/cold circuits. In the event of forced
activation of the cooling request, the generator is acti-
vated at the set temperature.
U s e r
s e t .
Separate management
heating/cooling
Cooling set:
Fig. 2-14
Press button
for the option "Separate heat./cool.
management" to start blinking.
Set as desired by pressing arrows
button to validate the modification.
At the end press button
main screen.
to confirm (YES) or cancel
button to validate
twice to go back to the
D 0 6
: CAL1
: CAL1
D 0 7
No
D 0 8
00.0 °C
. Press the
twice to go back to the
- "Fancoil" in winter. The option exclusively allows fan
coils to be used in winter operation mode. This option
may only be selected if it is provided for in the system
definition. Fancoils operate at the temperature set on
this page.
U s e r
s e t t i n g
Fancoil in winter:
Fig. 2-15
Press button
to start blinking.
Press arrows
(NO) any option. Press the
the modification.
At the end press button
main screen.
2.5
PROGRAMMING OPERATING TIME IN
COMFORT MODE
By following the points described below, it is possible to
create or modify the time program.

2.5.1 Daily hourly program

Press the
button to enter the navigation menu.
Press buttons
SLOTS".
N a v i g a t i o n
02.
USER SETTING
03.
Time PROGRAMS
04.
Info
Fig. 2-16
• Time slots. It is possible to set 4 calendars containing
4 time slots for system operation in comfort mode.
During the time outside these 4 time slots, the system
will work in economy mode.
After setting these 4 calendars it is possible to associate
them to the various days of the week and DHW func-
tion according to one's needs.
15
D 0 9
00.0
for the option "Fancoil in winter"
to confirm (YES) or cancel
button to validate
twice to go back to the
until selecting menu "02. TIME
m e n u
No

Advertisement

Table of Contents
loading

Table of Contents