Table of Contents
Advertisement
2
PROGRAMMING THE
"SYSTEM MANAGER KIT"
Programming of the "System Manager Kit" allows to set/
modify the following parameters:
- DHW temperature setting;
- comfort and low temperature levels;
- operating daily / weekly hourly program/ holiday
program.
- assistance menu.
2.1
DOMESTIC HOT WATER TEMPERATURE
SETTING
From the main screen, press arrows
DHW set is displayed (Fig. 2-1 and 2-2).
08:50
VE
DHW
DHW time slots:
Manual set
(permanent):
D.H.W.T.
:
Fig. 2-1
Press the
button again to make the first reading
(dhw time slots) blink.
Set as desired by pressing arrows
press button
to confirm and for the next value
(Manual Set) to start blinking. Proceed in the same way
to set the next figures.
After setting the last figure, when button is pressed
the cursor no longer blinks and it is possible to change
screens with buttons
At the end press button
main screen.
• Set manual: it lets you set the DHW set-point valid
until the next time range change;
• water T.: it displays in real time the domestic hot water
temperature.
• Dhw time slots: enables only the Manual Set to be
configured. If "Yes", Set Comfort and Set Eco can also
be configured.
until the
10/06/11
No
00 °C
00.0 °C
. At the end,
.
twice to go back to the
08:50
DHW
(Hou..clips dis.)
Set COMFORT:
Set ECO
D.H.W.T.
Fig. 2-2
Press the
(Set Comfort) blink.
Set as desired by pressing arrows
press button
(Set ECO) to start blinking. Proceed in the same way to
M02
set the next figures.
After setting the last figure, when button is pressed
the cursor no longer blinks and it is possible to change
screens with buttons
At the end press button
main screen.
• Set COMFORT: it lets you set the DHW set-point in
the COMFORT time range (refer to settings of DHW
time slots);
• Set ECO: it lets you set the DHW set-point in the ECO
time range (refer to settings of DHW time slots);
• water T.: it displays in real time the domestic hot water
temperature.
12
VE
10/06/11
:
:
button again to make the first reading
to confirm and for the next figure
.
twice to go back to the
M03
00 °C
00 °C
00.0 °C
. At the end,
Advertisement
Table of Contents
