Operation - Immergas VICTRIX PRO 35 1 I Instructions And Warning Book For The Users

Operation.

Symbols used in this manual:
Turn: select parameters, change
values
Press once: confirm, store
N 233B
Type of instrument
Instrument information
20 V 1.1
Software version
Standard display
WE 21 AUG ' 02
. . .
16:32
°C
62.5
Actual boiler temperature resp.
room temperature
6
The center-positioned knob and the labelled keys makes the operation simple and easy to handle.
- Each changeable value in the display appears flashing and can be modified with the knob.
Turn to the right (+) clockwise: increase values.
Turn to the left (-) anticlockwise: decrease values.
- Press once: acceptance of the selected and indicated value, store.
- Keep pressed for about 3 seconds: entry into the programming level (level selection).
The last operation step will be stored automatically after approximately 60 seconds if it was not
stored by touching the knob.
The LCD display:
The appliance is provided with a big LCD display. All info are displayed clearly and they are
available in different languages.
Attention: this cascade and zones regulator is set in Italian language as default. In order
to follow the regulation of the appliance as explained in this instruction manual, please
change the language into English, as explained on page 20
Language choice".
At commissioning the installation or after a power outage a segment test with automatic error
diagnostic takes place. The type of instrument with its software version is then displayed.
The standard display:
The standard display shows weekday, date, time and temperature. The temperature is that of the boiler
for the cascade and zones regulator. The zone manager displays room temperature instead.
"Setting of system parameters /
Page 5