Certifications - Teledyne Lecroy HVD3000 Series Operator's Manual

Certifications

Teledyne LeCroy certifies compliance to the following standards as of the time of
publication. Please see the EC Declaration of Conformity certificate shipped with your
product for current certifications.
EMC Compliance
EC D C
ECLARATION OF
The probe meets the intent of EC Directive 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official
Journal of the European Communities:
EN 61326-1:2013, EMC requirements for electrical equipment for measurement, control,
and laboratory use.
1. This product is intended for use in nonresidential areas only. Use in residential areas may cause EM interference.
2. Emissions exceeding the levels required by this standard may occur when product is connected to a test object.
3. To ensure compliance with the applicable EMC standards, use high quality shielded interface cables.
European Contact:*
Teledyne GmbH, European Division
Im Breitspiel 11c
D-69126 Heidelberg Germany
Tel: + 49 6221 82700
A & N Z
USTRALIA EW EALAND
The probe complies with the EMC provision of the Radio Communications Act per the
following standards, in accordance with requirements imposed by Australian
Communication and Media Authority (ACMA):
AS/NZS CISPR 11:2011 Radiated and Conducted Emissions, Group 1, Class A.
Australia / New Zealand Contacts:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067
* Visit teledynelecroy.com/support/contact for the latest contact information.
- EMC
ONFORMITY
1, 2, 3
D
ECLARATION OF
EAR99 technology subject to restrictions on copyrights page.
C —EMC
ONFORMITY
RS Components Ltd.
Unit 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
Operator's Manual
41