Hvd - Teledyne Lecroy HVD3000 Series Operator's Manual

HVD3000 Series High-Voltage Differential Probes
HVD________ Test Record
Serial Number:____________________________________________________
Asset / Tracking Number: _________________________________________
Date:______________________________________________________________
Technician:________________________________________________________
Equipment
Oscilloscope
Digital Multimeter
Function Generator*
* In this Performance Verification Procedure, the function generator is used for making relative measurements. The
output of the generator is measured with a DMM or oscilloscope. Thus, the generator is not required to be calibrated.
Step Description
5 Function Generator Output Voltage
11 Probe Output Voltage
13 Gain Error (test limit ± 1 %)
16 Probe Output Voltage
18 Gain Error (test limit ± 1 or 0.35 %)
20a Gain Error (test limit ± 0.35%) @ 10 V/Div

(HVD3220)

20b Gain Error (test limit ± 0.35 %) @ 5 V/Div
(HVD3220)
Permission is granted to photocopy this page to record the results of the Performance Verification procedure.
File the completed record as required by applicable internal quality procedures.
Line numbers correspond to steps in the procedure that require the recording of data.
•
• Record the actual specification limit check under "Test Result". The test limits are included in all steps.
Record other measurements and intermediate calculations that support the limit check under
•
"Intermediate Results".
32
Model
EAR99 technology subject to restrictions on copyrights page.
Serial Number
Intermediate Data
V
V
V
Calibration Date
Test Result
%
%
%
%