Table of Contents
Advertisement
HVD3000 Series High-Voltage Differential Probes
Item
Plunger Pincer Clips
Plunger Hook Clips
Case
Foam
Operator's Manual
* See "IEC/EN 61010-031 Definitions" on p.40.
‡ See page 39 for information about ordering replacement accessories.
Note: The *-NOACC options offer the probe without the accessories.
WARNING. To avoid injury or death due to electric shock, do not handle probe input
leads connected to the Spade Terminals while they are connected to a live voltage
source. Do not use Spade Terminals as hand-held accessories; they are meant to
be used as a permanent installation in a test set up.
10
Description
Designed with a long, thin, flexible stem for
attaching to hard-to-reach test points, the entire
body is fully insulated. The overall length is 161.6
mm (6.36 inch). The pincers can grab leads, pins
and wires up to 4 mm (0.157 inch) in diameter. 4
mm Banana (female) connector. 1 ea. red/black.
Designed with a flexible stem to access deep
targets in dense environments and a 4.5 mm
(0.177 inch) hook to attach to wire leaded parts.
The overall length is 157.6 mm (6.20 inches). 4
mm Banana (female) connector. 1 ea. red/black.
Soft storage case.
Custom foam insert for storage case.
EAR99 technology subject to restrictions on copyrights page.
Safety Rating*
Insulated 1000 V CAT II
Insulated 1000 V CAT II
QTY
2
2
1
1
1
Advertisement
Table of Contents
