Immergas BASIC MAGIS PRO Instructions And Warnings page 56

• Bend the strip (d2) around the storage tank unit
(a) and fasten it with the screw (D) (Fig. 11).
• Hang the hydraulic unit (c) on the central
bracket of the Solar Container. Secure the
position of the hydraulic unit by fasten-
ing the screws (d6) on the central bracket
(Fig. 12 ).
12
d2
10
a
N.B.: in the event that the installer thinks it is
necessary, it is possible to secure the position of
the hydraulic unit even further by using self-tap-
ping screws (d7), inserting them into the holes on
the lower part of the hydraulic unit itself.
13
13
d6
14
d7
d7
11
D
Attention: the fixing screws (d6 and d7) are
found in the accessories kit for coupling to
Magis Pro V2.
12
14
56
c
11