Table of Contents
Advertisement
3. Troubleshooting
2.
Do " Do "Head-Cleaning" 3 times.
3.
Do "Head-Flushing" 1 time.
4.
Adjust line feed.
5.
Allow the printer to remain unused overnight.
6.
Try again after 12 hours.
Replacement Procedure:
1.
Do " Do "Head-Cleaning" 3 times.
3
2.
Do "Head-Flushing" 1 time.
3.
Replace print head.
4.
Replace maintenance unit.
Ink cartridge
Ink cartridge absence not detected
Description: Closing the right front door with no ink cartridge set did not trigger the ink cartridge not set
alert.
Probable Cause: Cartridge cover sensor signal did not change.
Location: Ink cartridge cover sensor, control board
Service Center Procedure:
None
Replacement Procedure:
1.
Replace operation panel.
2.
Replace control board.
Ink Collection Tank
Ink collection tank improper installation not detected
Description: The ink collection tank is not installed correctly but this does not trigger and alert.
Probable Cause: The signal of the ink collection tank sensor did not change.
Location: Ink collection tank sensor, control board
Service Center Procedure:
None
42
Advertisement
Table of Contents
