Memory Module - HP OMEN X 17 Maintenance And Service Manual

Memory module

Description
Memory
4 GB 2400 MHz 1.2 v DDR4 shared
8 GB 2400 MHz 1.2 v DDR4 shared
16 GB 2400 MHz 1.2 v DDR4 shared
16 GB 2800 MHz XMP 1.35 v DDR4 shared
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module, (the
memory module tilts up.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Base enclosure on page
Battery on page 31)
38)
Spare part number
862397-850
862398-850
865396-850
L07040-850