Figure 19 Locations Of The Breakaway Tabs - Vaisala CARBOCAP GMW80 Series User Manual

GMW80 Series User Guide
WARNING!
CAUTION!
mounting base. That space is taken up by the CO
the transmitter cover is attached.
You can also bring the cable to the housing from above or below, but you have to break off the
small plastic tab that covers the hole on top or bottom of the housing.
Figure 19 Locations of the breakaway tabs
When wiring from below, you can secure the cable with a cable tie to provide strain relief.
28
Connect only de-energized wires.
Do not route the cable through the area marked NO CABLES on the
measurement module when
2
M211748EN-G