Display; Figure 4 Gmw88 Transmitter Parts - Vaisala CARBOCAP GMW80 Series User Manual

GMW80 Series User Guide
3
2
1
Figure 4 GMW88 transmitter parts
1 GM10 carbon dioxide measurement module
2 Screw terminals. The wiring information is printed on a label on the mounting base.
3 Transmitter cover with captive screws (4 pcs)
4 Mounting base
5 Screw holes for mounting on top and bottom of mounting base (2 screws, Ø 3.5 mm)
6 Alternative lead-through for wiring through the back (break seal, transfer cable gland here
and seal cable gland hole on bottom of transmitter)
7 Cable gland for leading the input/output cable (Ø 4 ... 8 mm) inside the enclosure
More information
‣ Installing GMW87 and GMW88 (page 26)
‣ Dimensions (page 47)
2.2 Display
GMW80 series transmitters with the letter D in the model name (for example, GMW83D) are
equipped with a display.
12
M211748EN-G
4
5
6
7