Other Commands; Enable Advanced Serial Commands; Reset Transmitter - Vaisala CARBOCAP GMW90 Series User Manual

User's Guide _______________________________________________________________________

Other Commands

60 ___________________________________________________________________ M211659EN-C

Enable Advanced Serial Commands

Use the PASS command to enable the advanced serial commands.
PASS [passcode]<cr>
where
passcode = Passcode to enable advanced commands is 9000.
Example:
>pass 9000

Reset Transmitter

Use the RESET command to reset the transmitter.
RESET<cr>
Example:
>reset
Resetting
GMW95R / 1.1.28.5849 / XM90
>