User's Guide _______________________________________________________________________
Serial Line Settings
52 ___________________________________________________________________ M211659EN-C
Set Remote Echo
Use the ECHO command to enable or disable remote echo by the
transmitter.
ECHO [on/off]<cr>
Example:
>echo on
Echo
Set Serial Line Turnaround Delay
With the SDELAY command you can set the turnaround delay of the
transmitter (time waited before replying to an incoming message) or view
the currently set delay value.
SDELAY [delay]<cr>
where
delay = Turnaround delay in milliseconds, range 1 ... 1000.
Example:
>sdelay 5
COM1 transmit delay : 5
: ON