Transmitter Parts; Figure 2 Transmitter Parts - Outside - Vaisala CARBOCAP GMW90 Series User Manual

Chapter 2 ___________________________________________________________ Product Overview

Transmitter Parts

VAISALA ________________________________________________________________________ 15
7
8
9
10
11
Figure 2 Transmitter Parts - Outside
1 = Locking screw for mounting base (M3×6).
2 = Inlet for CO
Use a 3 mm inner diameter silicone tube and 0.4 l/min flow.
3 = Adjustment trimmers.
4 = Service port.
5 = Window for display (only in models where the display is visible)
6 = Locking screw for slide (M3×6).
7 = Display.
8 = CO level indicator LEDs. Enabled on models with LED option.
2
Default settings:
- Green LED (bottom): lit between 0 ... 800 ppm CO
- Yellow LED (middle): lit between 800 ... 1200 ppm CO
- Red LED (top): lit between 1200 ... 5000 ppm CO
blinking at > 5000 ppm CO
9 = Type label.
10 = Holes for indicator LEDs (only in models with LED option).
11 = Grip for slide.
calibration gas.
2
1
2
3
4
5
6
1310-038
.
2
.
2
.
2
,
2