Table of Contents
Advertisement
Front view of the HP StoreOnce 4210/4220 Backup system
The HP StoreOnce 4200 Series Backup system is available in two models:
StoreOnce 4220 Backup system which has 12 x 1 TB disks
StoreOnce 4210 Backup system which also has 12 x 1 GB disks, however the configured
available disk capacity of the system is approximately 50% of this available disk capacity.
The system cannot be upgraded to use the whole capacity of the fitted disks because the
product is not fitted with the required memory or processor to make use of the additional
capacity.
Both models support connection of a single expansion shelf (Capacity Upgrade Kit), which doubles
physical storage capacity.
Figure 1 1 Front view of the HP StoreOnce 4220/4210 Backup system
1. Power On button/LED
2. Hot plug drives
3. Beacon LED
4. System Health LED
5. and 6. LAN port LEDS
7. Disk Beacon LED
8. Disk Online LED
Front view of the HP StoreOnce 2620 Backup system
The HP StoreOnce 2620 Backup system has 4 x 1 TB disks.
It does not support connection of an expansion shelf (Capacity Upgrade Kit).
Steady green: Power connected, device ready to use
Steady amber: Device switched off or in hibernation with
power connected
Off: No power connected
Steady blue: identifies the unit. The LED can be beaconed
on and off from the StoreOnce Management Console.
Amber: Power off or system hardware fault
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or
fan failure
Flashing green: network connection
Off: no network connection or network not configured
Front view of the HP StoreOnce 4210/4220 Backup system
45
Hide quick links:
Advertisement
Table of Contents
