Connecting To The Capacity Upgrade Kit (Optional) - HP StoreOnce G3 Installation And Configuration Manual

Figure 6 Network, power and system console connectors, HP StoreOnce 2620 Backup system
1. Power connector
3. Keyboard port for direct connection to CLI
5. LAN port 2 connector

Connecting to the Capacity Upgrade Kit (optional)

Install the rail kit and expansion module(s) immediately below or above the HP StoreOnce Backup
system, as described in the Capacity Upgrade Installation guide supplied with the expansion
module. This guide also contains detailed instructions about how to license the additional storage
and expand storage using the StoreOnce CLI.
HP StoreOnce 4430/4420 Series Backup system: Up to three expansion shelves may be
connected. It is recommended that the configuration shown below is followed. The user is
advised to make a record of which shelf serial number is connected to which RAID card and
its port for future reference.
HP StoreOnce 4220/4210 Series Backup system: Only one expansion shelf may be connected.
HP StoreOnce 2600 Series Backup system: This model does not support connection of an
expansion shelf.
2. Video port for direct connection to CLI
4. LAN port 1 connector, connect for easy install
Connecting to the Capacity Upgrade Kit (optional) 13