York YLAA0285SE Manual page 3

FORM 150.72-NM3 (1020)
ISSUE DATE 10/05/2020
In complying with Johnson Controls policy for
continuous product improvement, the information
contained in this document is subject to change
without notice. While Johnson Controls makes no
commitment to update or provide current information
automatically to the manual owner, that information,
if applicable, can be obtained by contacting the near-
est Johnson Controls Service office or accessing the
Johnson Controls Knowledge Exchange website at
https://docs.johnsoncontrols.com/chillers/
Revisions made to this document are indicated in the following table. These revisions are to technical information,
and any other changes in spelling, grammar, or formatting are not included.
AFFECTED PAGES
3 Conditioned Based Maintenance program information added
Traditional chiller maintenance is based upon assumed
and generalized conditions. In lieu of the traditional
maintenance program, a Johnson Controls YORK
Conditioned Based Maintenance (CBM) program can
be substituted. This CBM service plan is built around
the specific needs for the chiller, operating conditions,
and annualized impact realized by the chiller. Your lo-
cal Johnson Controls Branch can propose a customized
JOHNSON CONTROLS
CHANGEABILITY OF THIS DOCUMENT
REVISION NOTES
CONDITIONED BASED MAINTENANCE
It is the responsibility of operating/service personnel
to verify the applicability of these documents to the
equipment in question. If there is any question in
the mind of operating/service personnel as to the
applicability of these documents, then prior to working
on the equipment, they should verify with the owner
whether the equipment has been modified and if current
literature is available.
DESCRIPTION
Planned Service Agreement that leverages real time
and historical data, delivering performance reporting,
corrective actions required and data enabled guidance
for optimal operation and lifecycle assurance. The pro-
gram will include fault detection diagnostics, operation
code statistics, performance based algorithms and ad-
vance rules based rationale delivered by the Johnson
Controls Connected Equipment Portal.
3