Anker PowerPort Strip PD 6 Manual

Overview
Using Your PowerPort Strip
PowerPort Strip PD 6
A Power Light
B On / O Switch / Reset Button
C Surge Protection Light
D Grounded Protection Light
E AC Outlet
F USB-A Output
G USB-C Output
A
Power O
B
Power On
USB-C
When the switch is turned on, the Surge Protection Light and Grounded
●
Protection Light will turn blue. The Power Light will turn white.
Tip 1: The surge protection feature can protect your computers,
●
smartphones and other electronic equipment against voltage
fluctuations, surges, and spikes. If the Surge Protector Light is o , it
indicates the surge protector is not functioning normally.
Tip 2: In the event of a power overload, the On / O Switch will cut o
●
the power automatically.
Safety
Do not connect PowerPort Strip to an ungrounded outlet.
●
Do not use with extension cords.
●
Do not exceed electrical ratings.
●
Use in dry locations and indoors only.
●
Install PowerPort Strip away from heat-emitting appliances such as
●
radiators.
Keep children away from PowerPort Strip.
●
Do not connect one PowerPort Strip after another.
●
Do not cover PowerPort Strip when in use.
●
To disconnect the power, unplug PowerPort Strip.
●
Make an earthing connection before plugging the mains plug to the
●
mains,and when disconnecting the earthing connection, disconnect
after unplugging the mains plug from the mains.
Specifications
AC Input 125V AC 50/60Hz 15A
AC Output 1500W (when USB ports are not used)
USB A Output 5V 2.4A total (2.4A Max Each Port)
5V 3A, 9V 3A, 15V 2A, 20V 1.5A
The PowerPort Strip has a maximum 30W
USB C Output
output when charging via the USB-C port.
When the USB-A ports are used together
with the USB-C port, the maximum output
of the USB-C port will be reduced to 18W.
Maximum Peak
6000V
Voltage
Limit Voltage 500V
Surge Energy 1280J
Size 227 x 95 x 30 mm
Cable Length 2 m
@anker_o cial
@anker_jp
Anker Innovations Limited Product Number A9162
Room 1318-19, Hollywood Plaza, 610 Nathan PowerPort Strip PD 6
Road, Mongkok, Kowloon, Hong Kong
51005002414 V02