Coast to Coast Winegard ConnecT 2.0 Operation Manual page 2

Long-range, high-performance cellular wifi extender
Table of Contents

Advertisement

Introduction
Thank you for trusting Winegard to bring connectivity
solutions to you while on the go!
The Winegard
ConnecT
®
choosing where to adventure, all while bringing the comforts of the
internet securely to you and your devices. This product will connect
all of your WiFi enabled devices to either an available WiFi hotspot or
a 3G/4G/LTE cellular connectionat much greater distances.
WARNINGS:
• Do not paint any portion of the Winegard ConnecT. Painting the system could
damage the system and will void the warranty.
• When first setting up the Winegard ConnecT 2.0 it is recommended to check for
software updates the first time the system is connected to an Internet signal. It is
also recommended to check for updates every couple months for fixes and added
features.
• Please register your product at http://www.winegard.com/myantenna. We will be
able to pass along relevant information, as well as, inform you when software
updates are available.
Follow these instructions to search and connect to a local wireless
access point.
WARNING:
DO NOT CLICK THE BACK BUTTON on your web browser when navigating
through this software.
1) Turn on the power to the ConnecT. Turn on the WiFi enabled
device(s) that you want to connect and scan for wireless networks.
It may take a few minutes for the Winegard ConnecT network
(Winegard2ghzXXXXXX) to appear.
2) The label located on the front of this manual lists the unique default
SSID and password. Select this WiFi signal from the list of wireless
networks and connect. Once the correct SSID has been selected, enter
the password. It is recommended to set your device(s) to automatically
connect with the Winegard ConnecT 2.0.
3) Once connected, open an Internet browser and type 10.11.12.1 into
the address bar and press Enter. See figure 1. This will take you to the
Admin Login Screen. Figure 2. Login using:
Username: admin
The Winegard ConnecT can access the internet two different ways: from
a local WiFi network or a cellular network (4G/LTE).
4) To connect to a cellular network please see the Operation section
following the Installing the SIM Card section of this manual.
1
2.0 will provide you more freedom when
Password: admin
IMPORTANT:
DO NOT LOSE THIS MANUAL. It contains
your unique factory default SSID and password.
NOTE:
Winegard recommends web browsers Microsoft
Edge, Firefox
, and Google Chrome
®
NOTE:
Some networks will display a "splash
page" when connecting instead of using a network
password. When connecting to a network requiring
a splash screen for multiple days, it may be
necessary to clear your browser cache.
Figure 1
Figure 2
Browser.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf2au1b

Table of Contents