Sensor Board - HP Chromebook 11MK G9 Education Edition Maintenance And Service Manual

1. Detach the clear shield (1) that covers the sensor board cable ZIF connector on the system board.
2. Release the ZIF connector (2) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the system board.
3. Detach the clear shield (3) that covers the sensor board cable ZIF connector on the sensor board.
4. Release the ZIF connector (4) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the sensor board.
5. Detach the sensor board cable (5) from the computer. (The sensor board cable is attached to the computer
with double-sided adhesive.)
6. Remove the sensor board cable.
Reverse this procedure to install the sensor board cable.

Sensor board

To remove the sensor board, use this procedure and illustration.
Table 5-5 Sensor board description and part number
Description
Sensor board
NOTE: The sensor board spare part kit does not include the sensor board cable. The sensor board cable is included in the Cable Kit, spare
part number M44247-001.
Before removing the sensor board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover/keyboard
3. Disconnect the battery cable from the system board
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Top cover/keyboard on page
(Speakers on page
Spare part number
M44240-001
28).
28).
33).
ENWW