Touchpad - HP Chromebook 11MK G9 Education Edition Maintenance And Service Manual

4. Remove the touchpad cable (4).
Reverse this procedure to install the touchpad cable

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-2 Touchpad description and part numbers
Description
NOTE: The touchpad spare part kit does not include the touchpad bracket, touchpad bracket rubber, or touchpad cable. The touchpad
bracket is available using spare part number L89791-001. The touchpad bracket rubber is available using spare part number
L89786-001. The touchpad cable is included in the Cable Kit, spare part number M44247-001.
In jet black finish
In nautical teal finish
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover/keyboard
Remove the touchpad:
1. Remove the rubber pad (1) that secures the touchpad cable to the computer.
The rubber pad is available using spare part number L89786-001.
2. Remove the clear shield (2) that covers the touchpad screws.
3. Remove the three Phillips M2.0 × 2.2 broad head screws (3) that secure the touchpad to the computer.
4. Remove the four Phillips M2.0 × 2.8 screws (4) that secure the touchpad bracket and touchpad to the
computer.
5. Remove the touchpad bracket (5).
The touchpad bracket is available using spare part number L89791-001.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Top cover/keyboard on page
Spare part number
M44244-001
M44245-001
28).
28).
ENWW