Registration - Immergas SMARTECH PLUS Instructions And Warnings

10

1.4 REGISTRATION.

To complete the pairing procedure of Smartech Plus with an Immergas
generator, the following registration screen will appear where you must fill
in the Form to identify the system and customer.
11
Ref
1 Generator model previously selected from the list (Fig. 5)
2 Enter the generator serial number (Ref. 2, Fig. 12)
3 Enter the generator serial number control code (Ref. 3, Fig. 12)
4 Enter name and surname
5 Enter your phone number
6 Select province and Post Code where the system is installed
7 Select country where the system is installed
8 Enter a valid email address
9 Privacy
Enable remote access: select to allow the authorised technical
10
after sales centre to perform remote operations on the generator.
• Enter the generator serial number (Ref. 2, Fig. 11) applied on the
generator data nameplate (Ref. 2, Fig. 12).
• Enter the generator serial number control code (Ref. 3, Fig. 11) applied
on the generator data nameplate (Ref. 3, Fig. 12).
12
1 3
2
• Then enter the other data required by the registration form.
• Select "Enable remote access" (Ref. 10, Fig. 11) to enable the Author-
ised Technical After Sales Centre to perform remote operations on the
generator.
• At the end press "Continue".
1
2
3
4
5
6
7
8
9
10
7
Description