Description Of "Weekly Programming" Screen (Fig. 15); Description Of "Calendar Definition" Screen (Fig. 16) - Immergas SMARTECH PLUS Instructions And Warnings

2.5 DESCRIPTION OF "WEEKLY PROGRAMMING" SCREEN (FIG.
15).
Clock and programs.
This screen allows you to set the time slots and relative room temperatures.
Access this screen by pressing the button (Ref. 3, Fig. 14).
- Time slots. Smartech Plus allows you to set 4 calendars with 4 operating
time slots and relative room temperatures. Outside of these 4 time slots,
the system will run maintaining the temperature set in the parameter
"Eco room temperature setting" (Ref. 6, Fig. 14).
After setting these 4 calendars it is possible to associate them to the various
days of the week (Ref 2, Fig. 15).
- Having entered the menu by pressing "Cal. n. " (Ref. 1, Fig. 15) you access
the screen to define the switch on/off intervals (Fig. 16).
- When you've finished programming a calendar, pressing the go back to
previous screen button allows you to program any other available calen-
dars.
N.B.: The calendars associated to "Central heating" (winter operating mode)
or "Cooling" (cooling operating mode) are different. To view them and to
set them, first select the relative operating mode.
15
3
1
Ref
1 Calendar definition buttons
2 Definition of calendar associated to each day of the week
Display of operating mode associated to the current calendar:
3 - Central heating, (winter operating mode);
- Cooling, (cooling operating mode);
With generator paired to a storage tank unit, you may program heating from
the thermostat (see paragraphs 3.14, 3.15, 3.16, 3.17 and 3.18).
2
Description
2.6 DESCRIPTION OF "CALENDAR DEFINITION" SCREEN (FIG.
16).
Clock and programs.
This menu allows you to set the time slots and relative room temperatures.
16
6
3
2
Ref
1 Display of set intervals
2 Ignition intervals
3 ON - definition of interval starting time
4 OFF - definition of interval end time
5 Interval temperature setting
Display of operating mode associated to the current calendar:
- Central heating, (winter operating mode);
6
- Cooling, (cooling operating mode);
N.B.: to exclude use of one or more time slots, simply set the same start
and end time.
10
1
4 5
Description