Page 1
SMARTECH Instructions and warnings PLUS Chrono-thermostat “SMART”...
Page 2
Congratulations for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your “SMARTECH PLUS”...
INDEX Installation......................................... 4 Application download and installation on mobile devices (smartphone).........................4 Creating accounts............................................4 Associating APP to smartech plus......................................5 Registration..............................................7 Device connected to a generator......................................8 Description of main screen (Fig. 13).......................................8 Selection of operating mode........................................9 Room temperature setting.
Using the mobile device on which to install the application, connect to the App store of reference: App Store (Apple) or Play Store (Android) and type in “Immergas Smartech” in the search field. The app works with IOS 8 operating system or higher (Apple) and Android 6 or higher.
1.3 ASSOCIATING APP TO SMARTECH PLUS. N.B.: before this, make sure you have the password and the Wi-Fi network you want to connect to and make sure that this network has an Internet connection. Do not use a hotspot when associating the app.
Page 6
Choose the Wi-Fi network you want to connect the Gateway to and write the correct password. After connection to the Cloud, a message will appear of the presence of a new Smartech Plus, press “Next” and write the name you want to give to your Chrono-thermostat (Fig. 7). Complete the installation by following the wizard.
(Ref. 3, Fig. 12). 1.4 REGISTRATION. To complete the pairing procedure of Smartech Plus with an Immergas generator, the following registration screen will appear where you must fill in the Form to identify the system and customer.
In this mode, in addition to the settings available in On/Off mode, Smartech Plus acts a remote control and, by means of the Chrono-thermostat or the App, you may intervene on the main parameters, such as flow and domestic hot water temperature and view any error codes.
2.2 SELECTION OF OPERATING MODE. 2.4 DESCRIPTION OF “PROGRAMMING” SCREEN (FIG. 14). The buttons (Ref. 1, Fig. 13) allow you to select the following operating Press the “Programming” button (Ref. 10 Fig. 13) to access the “Program- modes: OFF, Summer, Winter, Cooling. ming”...
This menu allows you to set the time slots and relative room temperatures. Access this screen by pressing the button (Ref. 3, Fig. 14). - Time slots. Smartech Plus allows you to set 4 calendars with 4 operating time slots and relative room temperatures. Outside of these 4 time slots, the system will run maintaining the temperature set in the parameter “Eco room temperature setting”...
CHRONO-THERMOSTAT (FIG. 17). 3.2 DATE AND TIME SETTING. Date: you may set the date and time. 3.1 MAIN SCREEN. If A is displayed, the time and data are set automatically from Internet. The external body of the thermostat is either a button or adjustment knob. N.B.: check that the date and time are entered correctly to guarantee proper Navigation operations.
Page 12
If the chrono-thermostat is not connected to the Internet, you must enter the M mode, to manually set the current time and date. FRI 12:08 < ° < 15° < 09 : 57 09 : 57 21.5 11 : 57 01 - 01 - 2017 01 - 01 - 2017 01 - 01 - 2017...
3.3 LANGUAGE SETTING. Language: to set the language of the chrono-thermostat (Italian, English, French, Spanish, German, Russian). FRI 12:08 ° 15° 21.5 FRI 12:08 SETTINGS FRI 12:08 LANGUAGE ENGLISH...
3.4 THERMOSTAT SETTING. Thermostat (only with IMG Bus): you may set the “Maximum system flow temperature” and the “DHW temperature”. FRI 12:08 < ° 15° < 42 42 21.5 44 42 54 43 54 43 Perform the same procedure FRI 12:08 described for the “DHW temperature”.
3.5 CURVES SETTING. The curve displays the correction law of the flow temperature. Function of Curve (only with IMG Bus): you may enable/disable operation with ex- the outdoor temperature and of the position of the user heating temper- ternal probe and eventually it is possible to set the values that define the ature adjustment.
PAIRING BATTERY 3.24 FRI 12:08 20.4 15° FRI 12:08 ° HW VERSION: IMMERGAS STD 2.0 SW VERSION: 1.12 BLE CONNECTIONS: SETTINGS 00000 BLE STATUS: N.B.: the temperature set in Fig. 24 is the “forced manual” mode (the set NOT START:0 temperature remains active until the next scheduled time slot).
3.9 SET PROGRAM. Set: allows you to program the various days of the week, associating them to one of the stored calendars. FRI 12:08 < < ° 15° 21.5 FRI 12:08 < PROGRAM FRI 12:08 < < < Perform the same procedure described for the previous value, also for the other val- ues on the screen.
3.10 CALENDARS PROGRAM. It is also possible to modify the time slots of the various calendars by Cal1 - Cal2 - Cal3 - Cal4: to set the four time slots of the respective cal- changing the calendar at the top left of the chrono-thermostat (for example: endar selected.
Page 20
Calendar “Copy” and “Paste” function. It is also possible to manually change the data of the various calendars, to copy the calendar already set (for example: Cal2) and to paste it onto another calendar (for example: Cal3). FRI 12:08 < <...
3.11 SET ECO PROGRAM. 3.12 PROGRAM ON. Set Eco: allows you to set the room temperature outside of the programmed Program On: allows you to follow the hourly programming set by the user. time slots of the calendar. FRI 12:08 FRI 12:08 °...
3.13 PROGRAM OFF. Program Off: enables manual mode, keeping the room temperature set by the user. FRI 12:08 ° 15° 21.5 FRI 12:08 PROGRAM FRI 12:08 PROGRAM OFF FRI 12:08 ° 15° 21.5...
3.14 MON-FRI PROGRAM Mon-Fri (only with IMG bus and boilers paired to storage tank unit): al- lows you to set the four time slots of the storage tank from Monday to Friday. FRI 12:08 < < ° 15° TIME T° TIME T°...
3.15 SAT-SUN PROGRAM Sat-Sun (only with IMG bus and boilers paired to storage tank unit): allows you to set the four time slots of the storage tank on the weekend (Saturday and Sunday). FRI 12:08 < < ° 15° T° TIME TIME T°...
3.16 DHW PROGR ON. 3.17 DHW PROGR OFF. DHW Progr On (only with IMG bus and boilers paired to storage tank DHW Progr Off (only with IMG bus and boilers paired to storage tank unit): allows you to enable heating operation of the storage tank according unit): allows you to disable heating operation of the storage tank according to the DHW programming.
3.18 ANTILEGIONELLA PROGRAM. Antilegionella (only with IMG bus and boilers paired to storage tank unit): allows you to set every how many days the generator heats the storage tank to 60° C (max DHW). FRI 12:08 ° FRI 12:08 15° 21.5 ANTILEGIONELLA FRI 12:08...
ASSOCIATING SMARTECH TO ALEXA. This procedure makes it possible to control the installations directly from Alexa via Smartphone or Smart Speaker. 4.1 ALEXA ACCOUNT ASSOCIATION PROCEDURE. Complete the installation procedure (Chapter 1). Look for the Android/IOS Market on your smartphone and install the “Alexa”...
Page 28
You will then be requested the credentials given when being registered on Shift to the “Devices” menu and press “Thermostats” (Fig. 41) to view all the Smartech app containing the Installations (Fig. 40). Wait for Alexa to the registered installations (Fig. 42). connect the thermostats.
By pressing the desired installation, you may control the temperature directly from Alexa (Fig. 43). 4.2 CONTROL WITH VOICE COMMANDS. The installations can be controlled with Alexa voice commands. The following is a brief list of the recognised commands: - “Alexa check the temperature”; - “Alexa increase the temperature to 22 degrees”;...
AWAY FUNCTION. 5.3 JOINING A SMARTPHONE To join a Smartphone to the System, simply press the “JOIN DEVICE” The Away function is used to switch on or off the System based on the GPS button to fill the first free slot. Next to “JOIN DEVICE” you will see the position of the Smartphones joined to the System.
To remove all the Smartphones joined to the System, simply press “RESET 5.6 RANGE AWAY ALL DEVICES” (Fig. 48). When the AWAY mode is on, you can check the “range AWAY” of the joined devices (Smartphones) based on their “in” or “out” status as indi- cated in (Fig.
Page 32
This instruction booklet is made of ecological paper immergas.com Immergas S.p.A. 42041 Brescello (RE) - Italy Tel. 0522.689011 Fax 0522.680617...