Table of Contents
Advertisement
Trimble
Trimble 2101
Trimble Signal
RxD+
RxD-
Ground
Trimble 2101 Approach Plus GPS Receiver Software Configuration - Installation Setup
Access the 2101 installation setup submenu and go to the SERIAL I/O SETUP. Select the
GPS serial port which is to receive the pressure altitude data,
SERIAL-1 IN or SERIAL-2 IN.
Set data format to ENCODER.
Trimble 2101
Trimble
Signal
Serial Port 1
RxD+
RxD-
J1 - 3 or 20
Ground
2101 I/O Approach Plus GPS Receiver Software Configuration - Installation Setup
Access the 2101 installation setup submenu and go to the SERIAL I/O SETUP. Select the
GPS serial port which is to receive the pressure altitude data,
3
10 foot resolution altitude data must be provided to the interface adapter from the source altitude reporting device.
Trimble 2101 Approach Plus GPS Receiver
Trimble 2101
Port 1
Port 2
7
24
8
36
3 or 20
3 or 20
2101 I/O Approach Plus GPS Receiver
Trimble 2101
I/O
I/O
Serial Port 2
J1-7
J1-24
J1-8
J1-36
J1 - 3 or 20
SERIAL-1 IN or SERIAL-2 IN.
Set data format to ENCODER.
Serial I/O Connector DA-15S
Protocol assignment, jumper
pin 10 to ground on pins 1 or 5 or 8
Optional, jumper pin 2 to ground for 10'
Serial I/O Connector DA-15S
Protocol assignment, jumper
pin 10 to ground on pins 1 or 5 or 8
Optional, jumper pin 2 to ground for 10'
-29-
IA-RS232C-R
1 or 5
4 or 12
1 or 5
resolution.3
IA-RS232C-R
1 or 5
4 or 12
1 or 5
15
resolution.
Advertisement
Table of Contents
