Table of Contents
Advertisement
4.7 Dynamic Calibration Adjustment Procedure(continued)
You may quit the adjustment program at any time by typing "Q" twice, the
digitizer output will then be displayed on the PC screen.
10. After completing the above procedure you may examine the corrections
enteredinto the EEPROM. Type "D<enter>" to dump the EEPROM data and
read the current error curve on the PC screen. The following table should
appear:
00= 000
01= 000
06= 000
07= 000
12= 000
13= 000
18= 000
19= 000
24= 000
25= 000
30= 000
31= 000
36= 000
37= 000
42= 000
43= 000
90= 000
91= 000
96= 000
97= 000
The first two digits represent altitude x1000 feet and the last three digits after the equal sign
represent the amount of error introduced at the altitude in feet.
Note: 1.) Fields 90=000 through 99=000 contain TCI calibration data and are not user
accessible.
02= 000
03= 000
08= 000
09= 000
14= 000
15= 000
20= 000
21= 000
26= 000
27= 000
32= 000
33= 000
38= 000
39= 000
44= 000
45= 000
92= 000
93= 000
98= 000
99= 000
-20-
04= 000
05= 000
10=-080
11= 000
16= 000
17= 000
22= 000
23= 000
28= 000
29= 000
34= 000
35= 000
40= 000
41= 000
94= 000
95= 000
>current altitude
Advertisement
Table of Contents
