Table of Contents
Advertisement
4.5 Hyper Terminal Set-Up on the IBM Compatible PC:
Boot up the computer and start the Hyper Terminal program. Hyper Terminal
may be located in the Programs section or in the Accessories section under
Communications.
Under the New Connection window. (Identifies the new connection.)
Under the Connect to window (Selects the Com port to use.)
Under the Com ? Properties, (Sets communication properties.)
Under the Port Settings tab, set the following:
Select OK
In the Hyper Terminal window select File then click on Properties.
Under the Com ? Properties window click on the Settings tab.
Set the following:
-Choose an icon then select an identifying title such as "Test".
Select OK after you have made your choices.
-Choose Connect Using Com 1 or whatever Com port you have
chosen to use. After your selection click on OK.
Bits per second:
Data bits:
Parity:
Stop Bits:
Flow Control:
Function, arrow, ctrl keys to act as Terminal Keys.
Emulation to Auto Detect
Under ASCII Setup
Set the following:
The software is now configured for operation.
-15-
9600
8
None
1
None
Echo off.
Wrap lines that exceed terminal width.
Select OK.
Advertisement
Table of Contents
