Table of Contents
Advertisement
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Remove the speaker cable from the clips along the bottom of the battery (2).
3.
Remove the speakers from the computer (3).
NOTE:
installation.
Reverse this procedure to install the speakers.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-5
Touchpad description and part number
Description
Touchpad, natural silver
Touchpad, pale gold
Touchpad, spruce blue
Touchpad cable
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
28
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
Make sure the rubber gaskets are installed in the mounting holes in the speakers (4) before
Bottom cover on page
Battery on page
Preparation for disassembly on page
23).
24).
Preparation for disassembly on page
23).
24).
23).
Spare part number
M47685-001
M47686-001
M47687-001
M47676-001
23).
Advertisement
Table of Contents
