Memory Module - HP ENVY x360 15m Maintenance And Service Manual

Reverse this procedure to install the solid-state drive.

Memory module

To remove the memory module, use this procedure and illustrations.
Table 5-5 Memory module descriptions and part numbers
Description
8 GB, 3200 MHz, 1.2 ,v DDR4
4 GB, 3200 MHz, 1.2 ,v DDR4
Before removing the memory module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the memory module:
1. Detach the grounding tape (1) that secures the memory module shield to the heat sink.
2. Remove the memory module shied (2).
NOTE:
clips (3) built onto the system board.
The memory module shield is not available as a spare part component.
Bottom cover on page
When installing the memory module shield, be sure that the edges of the shield fit securely into the
Preparation for disassembly on page
29).
Battery on page
Spare part number
L46598-005
L83673-005
29).
31).
Memory module 35