Solid-State Drive - HP ENVY x360 15m Maintenance And Service Manual

Reverse this procedure to install the speakers.

Solid-state drive

To remove the solid-state drive, use this procedure and illustration.
Table 5-4 Solid-state drive description and part numbers
Description
M.2 2280, PCIe-NVMe:
1 TB value solid-state drive
512 GB value solid-state drive
256 GB value solid-state drive
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.9 screw (1) that secures the solid-state drive shield to the computer.
2. Detach the grounding tape (2) that secures the solid-state drive shield to the memory module shield.
3. Remove the solid-state drive shield (3).
The solid-state drive shield is not available as a spare part component.
Preparation for disassembly on page
Bottom cover on page 29).
29).
Battery on page 31).
Spare part number
L85370-005
L85364-005
L85354-005
Solid-state drive 33